"Relevant" mastering services - experiences, suggestions, etc?

Started by Peterson, May 21, 2018, 06:26:24 PM

Previous topic - Next topic

Peterson

So it occurred to me recently that there's not exactly a shortage of knowledgeable techies within "these types" of music whom offer mastering services; like Viktor Ottosson, Pekka PT, Pentti Dassum, Sean McCann, Jason Lescalleet, and probably others I'm forgetting. I'm considering having an upcoming piece "mastered" as I don't think my limitations can do it justice, but with a little tweaking beyond my capabilities, could reach it's potential.

My main question is this: do these types of guys offer by-commission services at specific rates? Or is it a more "Steve Albini" type of thing, where their available time and interest in the project is a determining factor in whether they'll master your stuff?

Anyone have experiences with any of the above-mentioned? Any advice to offer? What can a novice expect to spend to have a full-length release mastered?

Duncan

100% worth searching out and contacting Phil Julian in the UK about this.  Phenomenal electronic music artist who also happens to professionally master lots of people's work.


tiny_tove

some i can recommend:

https://www.plotkinworks.com/
Thomas of Control (I plan to have him master next wertham full length

in Italy, my fave guy is:

https://www.linkedin.com/in/yvanbattaglia/
very talented and knows noise/experimental
CALIGULA031 - WERTHAM - FORESTA DI FERRO
instagram: @ANTICITIZEN
http://elettronicaradicale.bandcamp.com
telegram for updated list: https://t.me/+03nSMe2c6AFmMTk0

moron

Quote from: pentd on August 27, 2018, 08:37:29 PM
soon nobody needs anyones services anymore
https://www.masteringbox.com/

Can't speak for the other site but masteringbox.com works best with sparse material, it's tuned for dance music and sharp transients especially (kicks, snares, etc.)  Anything that is dense or has lots of distortion tends to confuse the algorithm from my experience.  The less compressed to begin with the better the results.     

vomitgore

Seems like John Stillings and the Control lad are doing a lot of good work in the field. Many have spoken highly of them and the CDs I heard sounded very good.

Nolan

Quote from: moron on September 10, 2018, 09:18:14 PM
Quote from: pentd on August 27, 2018, 08:37:29 PM
soon nobody needs anyones services anymore
https://www.masteringbox.com/

Can't speak for the other site but masteringbox.com works best with sparse material, it's tuned for dance music and sharp transients especially (kicks, snares, etc.)  Anything that is dense or has lots of distortion tends to confuse the algorithm from my experience.  The less compressed to begin with the better the results.     

A non noise artist I did some production for used Landr to master the track we did and I thought it sounded awful. I ended up doing it myself.

Ozone 8 has a mastering assistant option where it analyzes your work and makes suggestions. The suggestions generally aren't far off the mark and make for good starting points in my experience (track assistant on their Neutron vst makes terrible choices though)

l.b.

j stillings from steel hook prostheses
andy vomit arsonist ive seen credited for mastering i think
grant richardson aka GNAWED

Electro Surgeon

Started using JOHN STILLINGS from Steel Hook Audio latelynon all my label releases and couldn't be happier.
The man knows his shit.
Has been mastering some punk bands for me too.

Highly recommended

INNERCITY UPRISING RECORDS
AUSTRALIAN NOISE AND PUNK